IN STOCK NOW..........

RC Dynamcis Voltage Booster for use in all 1S LiPo configurations - you can do away with the RX battery with this voltage booster which will provide a stable 6V for the RX and servo, no additional RX pack or RX pack charging required - plug and play!
Used by many top drivers in the 1/12th class. 

Technical Specifications Input Voltage 2.5-5.8V Output Voltage 6.0V Quiescent (No load) Current 3mA Typical Efficiency 90% Maximum Current 1.5A Maximum PCB Size 15×20mm Maximum Size including heatshrink 17×23mm Weight                                 Approx 6g Input Wire * 130mm 22AWG Output Wire * 90mm 26AWG Connector JST/Futaba Plug

    
Images courtesy of Trevor Coult

• Ultra minature, low weight design with built-in switch
• Designed to ensure weight and size are as low as possible specifically for 1/12th scale vehicles. Other boosters or receiver packs use a separate power switch these are often almost as large as the booster itself.
• Rugged design using the highest quality parts
• All components chosen are high quality parts designed for use in harsh environments. Circuit design and assembly techniques used are appropriate to military grade electronics.
• Efficient design
• Ensures maximum runtime, at a typical output current of 0.75A, only 0.45W of power will be consumed by the booster circuitry, this equates to only 16mAh of battery power consumed during the duration of the 8 min run.
  
• Inbuilt protection
• Output-over-current and short-circuit-protection prevents damage to the booster circuitry in the event of a fault with the connected electronics.
• LED Status indicator
• Provides quick and easy indication that the booster is powered and the switch is in the on position.